2-Guides/application-guide.md

 # Scope
-This guide describes the applcation-workflow as part of the community based assessment by the OSEGeV Conformity Assessment Body.
+This guide describes the application-workflow as part of the community based assessment by the OSEGeV Conformity Assessment Body.
 
 The guide is directed at projects that want to participate in the assessment, directly through the author or indirectly by supporters. Note that the authors always should be involved, since they could be required for adjustments during the assessment and also will be the ones receiving the attestation certificate.
 
 # The application workflow
 
-The application workflow initiates the community based assessment, which will check and - if applicable - approve that a piece of hardware can be studied, modified, produced and sold according to the definition by the [DIN SPEC 3105](/3-Further-Information/DIN-SPEC-3105-Open-Source-Hardware). In short this means, that the technology is reproducable without requirement of reverse engineering.
+The application workflow initiates the community based assessment, which will check and - if applicable - approve that a piece of hardware can be studied, modified, produced and sold according to the definition by the [DIN SPEC 3105](/3-Further-Information/DIN-SPEC-3105-Open-Source-Hardware). In short this means, that the technology is reproducible without requirement of reverse engineering.
 
 ## Application Requirements
 
@@ -18,7 +18,7 @@ To apply for assessment projects need at list to fulfil the following requiremen
     * All files to allow the use and modification (without the need for reverse engineering) need to be provided
     * Typical files encompass: 3D CAD-designs, PCB-Layout, Software-code
 * **Export files are provided**
-    * An export file is software independent and allows at least production access without requiring prorietary software
+    * An export file is software independent and allows at least production access without requiring proprietary software
     * Typical files encompass: .stl-files for 3D-printing, technical drawings for PCB production, wiring schemes
 * **Bill of Materials (BOM) provided**
     * A full list for all parts required to build the product
@@ -41,4 +41,4 @@ During the application these criteria are only superficially verified by the CAB
 
 Subsequently your project will be cloned to the OSEGeV CAB (ongoing reviews) and the assessment is prepared by the CAB administration (see [CAB administration guide](/2-Guides/cab-admin-guide)).
 
-Afterwars the assessment is performed, ideally resulting in the approval of the projects replicability (see [review-guide](/2-Guides/review-guide)).
+Afterwards the assessment is performed, ideally resulting in the approval of the projects replicability (see [review-guide](/2-Guides/review-guide)).
\ No newline at end of file