Oskar issueshttps://gitlab.opensourceecology.de/groups/verein/projekte/cab/oskar/-/issues2022-10-25T21:59:24+02:00https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/issues/2[Review][Proprietary]2022-10-25T21:59:24+02:00Lukas Schattenhofer[Review][Proprietary]# Proprietary Components of Oskar
- [x] approved (@alessandro)
- [x] approved (@Thorbijoern)
| part |count| reference| ...# Proprietary Components of Oskar
- [x] approved (@alessandro)
- [x] approved (@Thorbijoern)
| part |count| reference|
|:---|:---|:---|
| Kailh Choc low profile Switch tactile, brown CPG135001D02 | 10| [https://www.aliexpress.com/item/32838369089.html] |
| Kailh Choc low profile Kecaps | 10| [https://www.aliexpress.com/item/32949747794.html] |
| USB-OTG Cable USB-Micro-B-Connector | 1| [https://www.adafruit.com/product/3610] |AlessandroAlessandrohttps://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/issues/3[Review][standard parts]2022-10-25T21:59:20+02:00Lukas Schattenhofer[Review][standard parts]# Standard parts of Oskar
- [x] approved (@alessandro)
- [x] approved (@Thorbijoern)
| part |count| reference| ...# Standard parts of Oskar
- [x] approved (@alessandro)
- [x] approved (@Thorbijoern)
| part |count| reference|
|:---|:---|:---|
| Axial, through-hole Resistor 1 kOhm, 1/4 Watt | 1| [https://www.adafruit.com/product/4294] |
| Clipboard Screws 3 x 16 mm, DIN 7505-A | 4| [https://www.conrad.at/de/p/swg-spanplattenschrauben-3-mm-16-mm-kreuzschlitz-pozidriv-stahl-verzinkt-200-st-1203500.html] |
| Case 3D print PLA Filament | 1| [https://www.adafruit.com/product/2080] |
| Solder Wire, Sn 99.3%, Cu 0.7% with a flux of 2.2% | 1| [https://www.adafruit.com/product/2473] |
| Stranded-Core Wire 22AWG | 1| [https://www.adafruit.com/product/2976] |https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/issues/5[Review][Software]2022-10-25T21:59:15+02:00Lukas Schattenhofer[Review][Software]# Software of Oskar
|POS|NAME |UNITS|REFERENCE |
|---|--------------------------------|-----|---------------------- |
|1 |Firmware |1 |https://gitlab.opensourceecology.de/verein/p...# Software of Oskar
|POS|NAME |UNITS|REFERENCE |
|---|--------------------------------|-----|---------------------- |
|1 |Firmware |1 |https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar_firmware_arduino|
* Is the source code available?
* Is it clear how to flash or deploy the software onto the hardware?
* Is it clear how to use this software?
- [x] approved (@alessandro)
- [x] approved (@Thorbijoern)https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/issues/7[Review][PCB]2022-10-25T21:59:10+02:00Lukas Schattenhofer[Review][PCB]# PCB of Oskar
|POS|NAME |UNITS|REFERENCE |
|---|--------------------------------|-----|---------------------- |
|1 |PCB |1 |https://gitlab.opensourceecology.de/verein/projekte/cab/o...# PCB of Oskar
|POS|NAME |UNITS|REFERENCE |
|---|--------------------------------|-----|---------------------- |
|1 |PCB |1 |https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar_zither_pcb|
There needs to be the source file of the PCB and some export file that one can look at without specific software.
- [x] approved (@alessandro)
- [x] approved @thorbijoernhttps://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/issues/9[Review][OSH Components]2022-10-25T21:59:05+02:00Lukas Schattenhofer[Review][OSH Components]Please check if the components are open source (All information is available, Source Files) and accurately licensed.
| part |count| reference| ...Please check if the components are open source (All information is available, Source Files) and accurately licensed.
| part |count| reference|
|:---|:---|:---|
| Arduino Micro | 1| [https://store.arduino.cc/arduino-micro] |
- [x] @thorbijoern
- [x] @alessandrohttps://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/issues/8[Review][licences]2022-10-25T21:59:00+02:00Lukas Schattenhofer[Review][licences]An open source hardware project needs the correct licenses. There is the possibility to licenses documentation, software and hardware individually but it is also enough to use one open hardware licenses for everything. The licenses need ...An open source hardware project needs the correct licenses. There is the possibility to licenses documentation, software and hardware individually but it is also enough to use one open hardware licenses for everything. The licenses need to be OSHWA compliant. https://www.oshwa.org/definition/
- [x] approved (@alessandro)
- [x] approved @thorbijoernhttps://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/issues/6[Review][Assembly]2022-10-25T21:58:55+02:00Lukas Schattenhofer[Review][Assembly]# Assembly of Oskar
## Related files
- [assembly-instruction](https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/blob/assessment/CONSTRUCTION.md)
- [Bill of Materials](https://gitlab.opensourceecology...# Assembly of Oskar
## Related files
- [assembly-instruction](https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/blob/assessment/CONSTRUCTION.md)
- [Bill of Materials](https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/blob/assessment/BOM.txt)
- [CAD Files](https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar_zither_case/-/blob/assessment/zither.scad)
* Does everything make sense to you?
* Are any parts mentioned that do not show up in the BOM?
- [x] approved @alessandro
- [x] approved @thorbijoernhttps://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/issues/1[Review][main]2022-10-25T21:58:49+02:00Lukas Schattenhofer[Review][main]# Overview for the Community Review of Oskar
This is the main issue. Please do not fill out anything here.
If you have general feedback on Oskar leave a comment here. Any feedback is welcome as long as it is friendly and helpful.
## a...# Overview for the Community Review of Oskar
This is the main issue. Please do not fill out anything here.
If you have general feedback on Oskar leave a comment here. Any feedback is welcome as long as it is friendly and helpful.
## assessment issues
- [x] assembly (#6 )
- @alessandro @Thorbijoern
- [x] standard components (#3)
- @alessandro @Thorbijoern
- [x] proprietary components (#2)
- @alessandro @Thorbijoern
- [x] 3D-printed parts (#4)
- @alessandro @Thorbijoern
- [x] software (#5)
- @alessandro @Thorbijoern
- [x] PCB (#7)
- @alessandro @thorbijoern
- [x] OSH (#9)
- @alessandro @thorbijoern
## BoM
| material |count| reference|
|:---|:---|:---|
| Kailh Choc low profile Switch tactile, brown CPG135001D02 | 10| [https://www.aliexpress.com/item/32838369089.html] |
| Kailh Choc low profile Kecaps | 10| [https://www.aliexpress.com/item/32949747794.html] |
| Arduino Micro | 1| [https://store.arduino.cc/arduino-micro] |
| Axial, through-hole Resistor 1 kOhm, 1/4 Watt | 1| [https://www.adafruit.com/product/4294] |
| Clipboard Screws 3 x 16 mm, DIN 7505-A | 4| [https://www.conrad.at/de/p/swg-spanplattenschrauben-3-mm-16-mm-kreuzschlitz-pozidriv-stahl-verzinkt-200-st-1203500.html]|
| PCB | 1| [https://aisler.net/p/OPSGPOBN] |
| Case 3D print PLA Filament | 1| [https://www.adafruit.com/product/2080] |
| - Front | | |
| - Back | | |
| - 2x Thumb Plate | | |
| Solder Wire, Sn 99.3%, Cu 0.7% with a flux of 2.2% | 1| [https://www.adafruit.com/product/2473] |
| Stranded-Core Wire 22AWG | 1| [https://www.adafruit.com/product/2976] |
| USB-OTG Cable USB-Micro-B-Connector | 1| [https://www.adafruit.com/product/3610] |AlessandroAlessandrohttps://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar-braille-keyboard/-/issues/4[Review][3D-printed Parts]2022-02-02T18:55:27+01:00Lukas Schattenhofer[Review][3D-printed Parts]# 3D printed Components of Oskar
## 3D printed case
|POS|NAME |UNITS|REFERENCE |
|---|--------------------------------|-----|---------------------- |
|1 |Front |1 |https://gitlab....# 3D printed Components of Oskar
## 3D printed case
|POS|NAME |UNITS|REFERENCE |
|---|--------------------------------|-----|---------------------- |
|1 |Front |1 |https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar_zither_case|
|2 |Back |1 |https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar_zither_case|
|3 |2x Thumb Plate |1 |https://gitlab.opensourceecology.de/verein/projekte/cab/oskar/oskar_zither_case|
For 3D-printed parts there need to be the source files and some export format (such as .stl .step ...) available.
- [x] approved (@alessandro)
- [x] approved @ThorbijoernJohannes Střelka-PetzJohannes Střelka-Petz