[Review][main]
Overview for the Community Review of Oskar
This is the main issue. Please do not fill out anything here. If you have general feedback on Oskar leave a comment here. Any feedback is welcome as long as it is friendly and helpful.
assessment issues
-
assembly (#6 (closed) ) -
standard components (#3 (closed)) -
proprietary components (#2 (closed)) -
3D-printed parts (#4 (closed)) -
software (#5 (closed)) -
PCB (#7 (closed)) -
OSH (#9 (closed))
BoM
| material | count | reference |
|---|---|---|
| Kailh Choc low profile Switch tactile, brown CPG135001D02 | 10 | [https://www.aliexpress.com/item/32838369089.html] |
| Kailh Choc low profile Kecaps | 10 | [https://www.aliexpress.com/item/32949747794.html] |
| Arduino Micro | 1 | [https://store.arduino.cc/arduino-micro] |
| Axial, through-hole Resistor 1 kOhm, 1/4 Watt | 1 | [https://www.adafruit.com/product/4294] |
| Clipboard Screws 3 x 16 mm, DIN 7505-A | 4 | [https://www.conrad.at/de/p/swg-spanplattenschrauben-3-mm-16-mm-kreuzschlitz-pozidriv-stahl-verzinkt-200-st-1203500.html] |
| PCB | 1 | [https://aisler.net/p/OPSGPOBN] |
| Case 3D print PLA Filament | 1 | [https://www.adafruit.com/product/2080] |
| - Front | ||
| - Back | ||
| - 2x Thumb Plate | ||
| Solder Wire, Sn 99.3%, Cu 0.7% with a flux of 2.2% | 1 | [https://www.adafruit.com/product/2473] |
| Stranded-Core Wire 22AWG | 1 | [https://www.adafruit.com/product/2976] |
| USB-OTG Cable USB-Micro-B-Connector | 1 | [https://www.adafruit.com/product/3610] |
Edited by Johannes Střelka-Petz